TOILET
REPAIR

Is your toilet causing you headaches? At Central Plumbing Heating and Cooling, we’ve got you covered with our comprehensive toilet repair services. Whether you have a traditional model or a cutting-edge power flush system, our team of skilled technicians is well-equipped to handle repairs for all makes and models. Trust us to bring functionality back to your bathroom and ensure your toilet operates at its best.

TOILET REPAIR ALBUQUERQUE

Our team comprises experienced technicians with a wealth of knowledge in toilet repair. Rest assured that your toilet is in capable hands. We believe in transparent communication. Our technicians will explain the issue, outline the repair process, and provide an upfront estimate before starting any work. Your satisfaction is our priority. We stand by the quality of our work and ensure that your toilet is repaired to your complete satisfaction.

Don’t let toilet issues disrupt your daily routine. Contact Central Plumbing Heating and Cooling for reliable, efficient, and expert toilet repair services for all makes and models, including power flush systems. We’re here to restore comfort to your bathroom.

We also do Toilet Replacement

toilet repair Albuquerque

TOILET REPAIR

Running Toilet: This occurs when water continues to flow into the bowl after flushing, often due to a faulty flapper, fill valve, or float.

Leaking Toilet:
Leaks can happen around the base, indicating a damaged wax ring, or in the tank, often caused by a faulty flapper or fill valve.

Weak or Incomplete Flush: This can result from issues with the flapper, flush valve, or a low water level in the tank.

Clogged Toilet:
Obstructions in the drain pipe or trap can cause a toilet to clog, leading to poor flushing or water backing up.


Phantom Flush:
Also known as a “ghost flush,” this occurs when the toilet spontaneously flushes without anyone using it. It’s often due to a leaking flapper.


Constantly Running Water:
A toilet that won’t stop running may have a malfunctioning fill valve, flapper, or float.


Toilet Doesn’t Flush Completely: Inadequate flushing can be caused by a partial clog, a low water level, or issues with the flapper or flush valve.


Condensation:
Moisture on the outside of the tank or bowl is often mistaken for a leak but is actually due to condensation, especially in humid conditions.


Faulty Tank Components:
Issues with tank bolts, washers, or the flush handle can also lead to various problems.


Cracked Tank or Bowl:
Visible cracks in the tank or bowl can result in leaks and may require replacement.

Identifying the specific issue is crucial for effective toilet repair. Professional plumbers can diagnose and address these problems to ensure the toilet functions properly. Regular maintenance and prompt repair can help prevent more extensive issues in the long run.

LEAKING TOILET

A toilet can leak water for several reasons. Here are some common causes of toilet leaks:

Faulty Flapper:
The flapper is a rubber component in the tank that controls the release of water into the bowl. If it’s worn, damaged, or misaligned, it can cause water to leak into the bowl.


Faulty Fill Valve:
The fill valve regulates the water level in the tank. If it malfunctions, it may result in water continuously flowing into the overflow tube, leading to a constant leak.


Improperly Adjusted Float:
The float is responsible for shutting off the fill valve when the water reaches a certain level. If the float is set too high or too low, it can cause water to overflow into the overflow tube, leading to a leak.


Cracked Tank or Bowl:
A crack in the toilet tank or bowl can result in water leakage. Inspect the tank and bowl for any visible cracks.


Loose or Worn Wax Ring:
The wax ring seals the connection between the toilet and the floor drain. If it’s loose or worn, water can seep out around the base of the toilet.


Faulty Tank Bolts or Washers:
The bolts and washers securing the tank to the bowl may deteriorate over time, leading to leaks. Tightening or replacing these components may be necessary.


Condensation:
In humid conditions, condensation can form on the exterior of the tank and bowl, giving the appearance of a leak. This is not a functional issue but can be mistaken for a leak.

To identify the cause of the leak, it’s advisable to conduct a thorough inspection of the toilet components. If you’re unsure or if the issue persists, consulting with a plumber is recommended for a proper diagnosis and repair.
pipe right 1

Q&A

A running toilet can be not only annoying but also wasteful, as it can lead to unnecessary water consumption and higher utility bills. Fortunately, fixing a running toilet is often a straightforward DIY task that requires minimal tools and expertise. Here’s a step-by-step guide to help you troubleshoot and resolve the issue.

Identify the Problem: The first step is to determine the cause of the running toilet. Lift the tank lid and observe what is happening. The most common culprits are a faulty flapper, a malfunctioning fill valve, or a problem with the flush handle.

Check the Flapper: The flapper is a rubber valve at the bottom of the tank that controls the water flow into the bowl. If it doesn’t seal properly, water will continuously leak into the bowl. Inspect the flapper for any signs of wear or damage. If it looks worn out, replace it with a new one. Make sure it sits flush over the drain hole when closed.

Adjust the Chain: If the chain connecting the flush handle to the flapper is too long or too short, it can affect the flapper’s ability to seal. Adjust the chain length, ensuring there is some slack but not too much. This allows the flapper to close completely after flushing.

Inspect the Fill Valve: The fill valve, often located on the left side of the tank, regulates the water level in the tank. Ensure that it is functioning correctly. If there are signs of corrosion or if the valve is not shutting off properly, consider replacing it.

Check the Float: The float is a buoyant device that signals the fill valve to stop the water flow when the tank is full. If the float is set too high, it may cause the water level to rise and trigger the overflow tube, leading to a continuous flow. Adjust the float to the proper level.

Examine the Flush Handle: If the flush handle is loose or not properly connected to the flapper, it may not lift the flapper adequately. Tighten any loose connections and ensure that the handle lifts the flapper completely when flushed.

Clean or Replace Components: Over time, sediment and mineral deposits can accumulate in the fill valve and other components. Clean any debris and, if necessary, consider replacing parts that are heavily corroded or damaged.

By following these steps, you can usually diagnose and fix a running toilet on your own. If the issue persists, or if you’re uncomfortable with the repairs, it’s advisable to seek professional plumbing assistance. Regular maintenance and prompt attention to toilet issues can help conserve water and prevent unnecessary expenses.

A clogged toilet is a common household issue that can be both inconvenient and potentially messy. However, resolving a toilet clog is typically a manageable task that can be tackled without the need for professional assistance. Here’s a step-by-step guide to help you address a clogged toilet effectively.

Assess the Situation: Before taking any action, assess the severity of the clog. If the water level is high and rising, quickly turn off the water supply to the toilet. Locate the shut-off valve, usually located on the wall behind or beside the toilet, and turn it clockwise to stop the flow of water.

Use a Plunger: A plunger is a simple yet effective tool for unclogging toilets. Ensure there is enough water in the bowl to cover the plunger’s cup. Place the plunger over the drain hole, ensuring a tight seal, and push down firmly, then pull up sharply. Repeat this motion several times to create suction. In many cases, this action will dislodge the clog.

Auger or Snake: If the plunger doesn’t work, consider using a toilet auger or snake. Insert the auger into the drain hole and rotate the handle clockwise. The auger’s extended cable will help break up and retrieve the clog. Be cautious not to damage the porcelain surface of the toilet bowl with the auger.

Hot Water and Dish Soap: Another method is pouring hot water mixed with dish soap into the bowl. The soap can help break down the clog, and the hot water may assist in dislodging it. Allow the mixture to sit for a few minutes before attempting to flush the toilet.

Chemical Drain Cleaners (Optional): Chemical drain cleaners are an option, but they should be used cautiously. Follow the manufacturer’s instructions carefully, as these chemicals can be harsh and may damage pipes or the toilet itself. Avoid using them if you’ve already used a plunger or auger, as the chemicals can splash back.

Prevent Future Clogs: To prevent future clogs, be mindful of what you flush down the toilet. Avoid flushing large amounts of toilet paper at once, and never flush items like paper towels, feminine hygiene products, or excessive amounts of hair. Consider using septic-safe toilet paper, which breaks down more easily.

If these DIY methods fail to resolve the issue, or if you’re uncomfortable performing the troubleshooting yourself, it’s advisable to seek professional plumbing assistance. Persistent or frequent clogs may indicate underlying plumbing problems that require expert attention. Regular maintenance and responsible use can contribute to a trouble-free toilet system in the long run.